Welding Services

Vishwakarma Fabrication Work Pvt. Ltd. is a Delhi NCR-based welding and metal fabrication company that has been joining, building, and repairing steel and stainless-steel structures since day one — with 15+ years of combined team experience and 500+ completed projects across Delhi, Noida, Gurugram, Faridabad, and Ghaziabad. If you are searching for welding services in Delhi NCR, this page will walk you through exactly what we do, how we do it, what it costs to think about, and why homeowners, builders, shop owners, and factory managers across the region call us first when a gate needs fixing, a shed needs raising, or a production line needs a certified structural weld.

We are not a single-welder operation working out of a toolbox. We run three service locations — our Badarpur head office, a New Ashok Nagar branch, and a Faridabad (Sector 84) unit — and a full in-house team of welders, fitters, and fabricators who handle everything from a single broken hinge to a multi-bay industrial shed. Every job is billed with proper GST invoicing, every site visit is followed by a written estimate, and every weld is inspected before we call a project complete.

Why Delhi NCR Trusts Vishwakarma for Welding & Metal Fabrication

Delhi NCR is one of the most demanding markets in India for fabrication work. Between narrow residential lanes in Badarpur and Faridabad, high-rise societies in Noida and Gurugram, and heavy industrial belts along the Delhi-Faridabad and Delhi-Ghaziabad corridors, a welding contractor here has to be equally comfortable welding a decorative balcony railing on the fourth floor of an apartment and cutting structural I-beams for a warehouse roof. That range is exactly what we built our team around.

Clients keep coming back to us — and referring us to their neighbours, societies, and business contacts — for a few consistent reasons:

• Experienced welders: our fabricators have handled everything from home grills to factory sheds, so they don't need to "figure it out" on your site.
• Fast site visits: most Delhi NCR locations get a visit scheduled within 24–48 hours of your first call or WhatsApp message.
• Transparent pricing: you get a written estimate before work starts — no verbal numbers that change halfway through the job.
• GST billing: every invoice is issued against our GSTIN (07NMCPS5206P1ZA), which matters for builders, RWAs, and companies that need proper documentation.
• Premium materials: we source MS and SS from established suppliers and can show you material grade before it goes into your project.
• Professional equipment: our welding sets, cutting tools, and safety gear are maintained for consistent, clean welds — not makeshift jugaad.
• On-time delivery: we quote a realistic timeline during the site visit and work to it, because a half-finished gate or an open shed roof is a real inconvenience for you.

Our Complete Range of Welding & Fabrication Services

"Welding" means very different things depending on who's asking. A homeowner usually means a gate, a grill, or a staircase railing. A shop owner means a shutter frame or a signage structure. A factory manager means structural steel, machine bases, or a production shed. We cover all three worlds under one roof, and the sections below explain each service area in detail so you know exactly what to expect.

Residential Welding Services

Residential welding is where most of our clients first meet us — a main gate that's started sagging, a balcony railing that needs replacing, or a new staircase for an under-construction floor. For homes, we handle main gates, sliding and swing gates, window grills, balcony and terrace railings, staircase railings, jaali (lattice) work, car parking sheds, water tank stands, and small custom metal furniture. Because this work happens inside occupied homes and narrow residential streets, we plan around your household's schedule, protect flooring and walls during cutting and grinding, and keep noise and mess to a minimum. Most residential welding jobs — a gate repair, a new grill, a railing section — are completed in a single day once material is on site; larger jobs like a full staircase or multiple floor railings may take two to four days.

Commercial Welding Services

Commercial clients — shops, showrooms, offices, restaurants, clinics, and small business units — need work that looks presentable and holds up to daily foot traffic, without long shutdowns. Our commercial welding scope includes shutter frames and grill gates, signage and hoarding frames, staircases and fire-exit railings, storage racks and mezzanine structures, glass-partition metal frames, and front-elevation cladding structures. We try to schedule noisy or disruptive work during off-hours where possible, and for shops that can't close, we sequence the job so the space stays usable while we work section by section.

Industrial Welding Services

Industrial welding is the most demanding category we handle — it covers factory sheds, warehouse structures, heavy machine bases, conveyor frames, pipe racks, platforms, and structural steel for production floors. This work uses thicker gauge material, load-calculated joints, and a higher level of inspection because the consequences of a weak weld are far more serious than in a home or shop setting. Our industrial welding teams work with factory maintenance schedules, follow site-specific safety protocols, and can mobilise for both new-build fabrication and emergency breakdown repairs on existing plant equipment.

Structural Steel Fabrication

Structural welding is the backbone category behind sheds, warehouses, mezzanine floors, and multi-storey steel frames. It involves joining load-bearing components — columns, beams, trusses, and bracing — so the finished structure carries the weight it's designed for safely, over decades, not just on installation day. We calculate joint requirements based on the load the structure will carry, use full-penetration welds where the design calls for it, and inspect every structural joint before it's covered, painted, or built over. If you're extending a factory bay, adding a mezzanine storage level, or building a new steel-frame structure from the foundation up, this is the category your project falls under.

SS & MS Fabrication

Mild steel (MS) and stainless steel (SS) are the two materials behind almost everything we build, and each needs a different welding approach. Mild steel fabrication is the workhorse choice for gates, grills, sheds, structural frames, and anything that will be painted or powder-coated afterward — it's strong, cost-effective, and easy to weld into complex shapes. Stainless steel welding is chosen when appearance and corrosion resistance matter more — balcony and staircase railings in premium homes, kitchen and hospital equipment, hotel and restaurant fittings, and any outdoor structure exposed to Delhi NCR's monsoon humidity and pollution. SS welding needs cleaner technique and controlled heat input to avoid discolouration and to preserve the metal's corrosion resistance at the joint — this is one of the areas where having an experienced welder, not just any welder, actually shows in the finished product.

Gate Fabrication

Main gates are one of our most requested jobs, and for good reason — a gate is the first thing anyone sees of your property, and it takes the most daily wear of any fabricated item on site. We build swing gates, sliding gates, motorised/automatic gate frames, designer laser-cut gates, and simple utilitarian MS gates for plots, farmhouses, factories, and societies. Gate fabrication starts with accurate site measurement (an uneven opening is common in older properties and has to be accounted for in the frame), followed by frame fabrication, panel or grill infill, hinge and lock-point reinforcement, and finally fitting and alignment on site so the gate swings or slides smoothly without dragging.

Railing Fabrication

Railings — for balconies, staircases, terraces, and boundary walls — combine structural safety with visual design, so this is where we spend the most time on finishing. We fabricate simple MS pipe railings, stainless steel railings with glass infill, designer grill patterns, and laser-cut decorative panels. Every railing is welded to meet a minimum height and load-bearing standard for fall protection, with base plates anchored securely into the floor or wall — this is not an area where we cut corners, because a railing's entire job is to prevent a fall.

Tin Shed Fabrication

Tin sheds and PEB (pre-engineered building) style sheds are a major part of our industrial and semi-industrial work — covering factory floors, warehouses, godowns, parking areas, and workshop spaces. This work combines structural steel framing (columns, trusses, and purlins) with galvanised or colour-coated roofing sheets, insulation where needed, and proper drainage and ventilation planning. A tin shed done right isn't just "a roof on poles" — the frame has to be engineered for wind and rain load, and the sheet fixing has to be leak-proof through multiple monsoon seasons.

LED Hoarding & Unipole Fabrication

Outdoor advertising structures — LED hoarding frames and unipole structures — need a different kind of structural thinking than a shed, because they carry significant wind load at height with a relatively small footprint. We fabricate the steel base, mast, and display-mounting frame, calculate for wind loading appropriate to the height and panel size, and weld every joint to withstand years of continuous outdoor exposure. This is specialist structural welding work, and we've delivered it for advertising and signage clients across Delhi NCR.

Fencing Fabrication

Boundary and security fencing — for plots, factories, farmhouses, and under-construction sites — is welded to be durable against tampering and weather while staying within your budget. We fabricate MS angle and pipe fencing, chain-link fencing with welded frames, palisade-style security fencing, and razor-wire-ready boundary structures for industrial sites that need a higher security specification.

Pergola Fabrication

Pergolas have become one of our fastest-growing residential and commercial categories — terrace, rooftop, garden, and poolside pergolas that combine a welded steel or MS frame with wood-finish cladding, fabric shade, or polycarbonate sheeting. A pergola frame has to be engineered to carry the weight of whatever covers it (and, in Delhi NCR, occasional heavy rain) without sagging, so we size the frame members and weld the joints accordingly rather than using undersized pipe just because it looks lighter.

Front Elevation Fabrication

Front elevation work covers the metal structures that shape how a building's facade looks and functions — canopy and porch frames, cladding support structures, decorative screens (jaali), signage mounts, and entrance gate integration. Because this work is the "face" of a home or commercial building, we pay close attention to finish quality — clean weld seams, consistent grinding, and proper surface prep before painting or powder coating — in addition to structural soundness.

Laser Cutting & Designer Railing Fabrication

For projects that need intricate patterns — designer gates, decorative railings, jaali screens, and signage lettering — we use laser-cut steel and stainless-steel panels combined with precision welding to assemble the final structure. Laser cutting gives clean, repeatable patterns that would be slow and inconsistent to cut by hand, and it pairs naturally with our railing and gate fabrication work when a client wants a specific design rather than a standard grill pattern.

Warehouse & Factory Welding

Beyond new-build structural work, we handle ongoing welding needs inside active warehouses and factories — racking systems, platform extensions, conveyor and machine-guard fabrication, pipe supports, and general structural modifications as a facility's needs change. This work is usually scheduled around production hours and follows the site's own safety protocols in addition to ours.

Repair & Maintenance Welding

Not every job is a new build. A large part of our work is repairing and reinforcing what's already there — a cracked gate hinge, a rusted railing base, a bent shed truss after a storm, a broken machine bracket, or a staircase that's come loose from its wall anchors. Repair welding often needs to happen faster than a new fabrication project, so we prioritise these calls and can usually get a welder on site the same day or next day for urgent repairs, especially where a broken gate or railing is a security or safety concern.

Custom Fabrication Solutions

Plenty of projects don't fit neatly into a standard category — a custom machine stand, a specific storage rack for an odd-shaped space, a one-off display structure, or a design you've seen elsewhere that needs to be adapted to your site. We take on custom fabrication work regularly; it just means the site visit and estimate process takes a bit more discussion up front so we understand exactly what you need before cutting any steel.

Welding Technologies We Use: MIG, TIG & ARC Welding

The welding method matters as much as the welder's skill. Different jobs — different metals, thicknesses, and finish requirements — call for different techniques. Our team is trained across all three major welding processes so we can pick the right one for your project rather than forcing every job through a single method.

MIG Welding

MIG (Metal Inert Gas) welding feeds a continuous wire electrode through a welding gun, shielded by an inert gas, producing fast, clean welds on mild steel and stainless steel. It's our go-to method for gates, grills, railings, and general fabrication where speed and consistent bead quality matter — most of our residential and commercial welding work is done using MIG.

TIG Welding

TIG (Tungsten Inert Gas) welding uses a non-consumable tungsten electrode and gives the welder precise control over heat input, producing the cleanest, most refined welds of any process. We use TIG for stainless steel welding where appearance matters — visible railings, kitchen and hospital fittings, and thin-gauge material where excess heat would warp or discolour the metal.

ARC Welding

ARC (Shielded Metal Arc) welding is the most versatile and site-friendly process — it works outdoors, in windy conditions, and on thicker structural sections where MIG or TIG would be impractical. We rely on ARC welding for structural steel, heavy fabrication, and site-based industrial work where portability and joint strength matter more than surface finish.

Comparing MIG, TIG & ARC Welding

Process	Best For	Finish Quality	Typical Use in Our Work
MIG Welding	MS & SS, general fabrication	Clean, fast	Gates, grills, railings, sheds
TIG Welding	Stainless steel, thin material	Highest precision	Visible SS railings, kitchen/hospital fittings
ARC Welding	Thick structural steel, outdoor sites	Strong, functional	Structural frames, industrial sheds, heavy repair

Materials We Work With

Material	Common Uses
Mild Steel (MS)	Gates, grills, sheds, structural frames, fencing
Stainless Steel (SS 304/202)	Railings, kitchen/hospital fittings, premium finishes
MS Angle & Channel	Structural frames, racking, shed trusses
MS/GI Pipe & Tube	Railings, pergolas, fencing, gate frames
Galvanised & Colour-Coated Sheets	Tin shed and warehouse roofing/cladding
Wrought Iron & Cast Elements	Decorative gates and grills

We source material through established suppliers rather than the cheapest scrap-grade stock available, because a weld is only as good as the metal on either side of it. For projects where you want to specify a particular grade or brand of steel, we're happy to discuss that during the site visit.

Our Welding & Fabrication Process

Every project — whether it's a single gate or a full factory shed — follows the same core process, scaled to the size of the job:

1. Site inspection & requirement analysis: we visit your site, take accurate measurements, and discuss what you need, including any design references you have.
2. Material selection (MS/SS) & design finalisation: we confirm material grade, thickness, and design details, and share a written estimate.
3. Fabrication & welding work: cutting, fitting, and welding is done either in our workshop (for items delivered and installed) or on-site (for structural and repair work), following the process appropriate to the material and joint type.
4. Finishing & quality check: grinding, surface prep, priming/painting or powder coating, and a joint-by-joint inspection before anything leaves our hands.
5. Final installation & handover: we install, align, and test-operate (for gates, doors, and moving parts), then walk you through the finished work.

Safety Standards We Follow

Welding involves open flame, high heat, and, on structural jobs, significant working loads — so safety isn't optional. Our teams work with proper PPE (gloves, welding shields/goggles, and protective clothing), use fire-safe practices around flammable material on site, ground and insulate equipment correctly to prevent electrical hazards, and follow site-specific safety protocols when working inside occupied homes, running businesses, or active factories. For structural and industrial jobs, we also follow load-appropriate joint design so the finished structure is safe to use, not just safe to build.

Our Quality Inspection Process

Before we consider any job finished, our team checks weld penetration and bead consistency, joint alignment and structural fit, surface finish and paint/coating quality, and — for moving parts like gates and doors — smooth, correctly aligned operation. On larger structural and industrial projects, we inspect key joints before they're covered by cladding, flooring, or paint, since that's the last point where a problem can be caught and corrected without rework.

Industries & Clients We Serve

• Residential societies, builders, and individual homeowners
• Retail shops, showrooms, restaurants, and offices
• Factories, warehouses, and manufacturing units
• Logistics and storage/godown operators
• Advertising and signage companies (hoardings, unipoles, LED displays)
• Hospitals, clinics, and institutions
• Hotels and hospitality businesses
• Real estate developers and construction contractors

What Affects the Cost of a Welding & Fabrication Project

We don't publish a fixed price list because welding and fabrication pricing genuinely depends on project-specific factors — and any website that quotes a flat "per square foot" rate without seeing your site is guessing. What we can tell you is what drives the cost, so you know what to expect when you request a quote:

• Material type & grade — MS is generally more economical than SS; grade and thickness both affect material cost.
• Design complexity — a simple grill pattern costs less than laser-cut designer work or intricate jaali patterns.
• Size & scope — a single gate versus a full boundary fence or shed obviously scales differently.
• Site conditions — ground-floor access versus a high-rise balcony, or a live factory floor versus an empty plot, affects labour and equipment logistics.
• Finishing — plain paint versus powder coating or premium SS polish adds to the cost.
• Timeline — urgent/same-day work may carry a different scheduling cost than a planned project with a flexible timeline.

The most reliable way to get an accurate number is a free site visit — we measure, discuss your requirements, and hand you a written estimate with no obligation.

Choosing the Right Welding Service Provider

When you're comparing welding contractors in Delhi NCR, look past the lowest quoted price and check for: relevant experience with your type of project (residential ≠ industrial), a physical office/workshop address rather than only a phone number, GST billing for proper documentation, willingness to give a written estimate before starting work, and — where possible — references or past project photos. A contractor confident in their work will always walk you through the process clearly rather than rushing you into a verbal agreement.

Areas We Serve Across Delhi NCR

We provide welding and fabrication services across Delhi, Noida, Gurugram, Faridabad, Ghaziabad, and the wider Delhi NCR region, with dedicated teams operating out of our Badarpur (head office), New Ashok Nagar, and Faridabad (Sector 84) locations — so response times stay fast whether you're in South Delhi, East Delhi, or across the Haryana/UP border.

Frequently Asked Questions

1. What welding services does Vishwakarma Fabrication Work provide?

We provide residential, commercial, and industrial welding — including gate fabrication, railing fabrication, structural steel work, MS & SS fabrication, tin shed construction, pergolas, fencing, LED hoarding structures, and repair/maintenance welding across Delhi NCR.

2. Do you provide welding services at home, or only in a workshop?

Both. Repairs, gate installation, and structural site work are done on location, while some fabricated items (grills, gate panels, custom pieces) are built in our workshop and then transported and installed on site.

3. Which areas in Delhi NCR do you cover?

We serve Delhi, Noida, Gurugram, Faridabad, and Ghaziabad, with local teams based in Badarpur, New Ashok Nagar, and Faridabad Sector 84.

4. What's the difference between MIG, TIG, and ARC welding?

MIG welding is fast and clean, suited to general MS/SS fabrication. TIG welding gives the most precise, refined finish and is ideal for visible stainless steel work. ARC welding is the most portable and site-friendly, best for thick structural steel and outdoor work.

5. Do you provide GST billing?

Yes. Every invoice is issued under our GSTIN (07NMCPS5206P1ZA), which is important for builders, companies, and RWAs that need proper documentation for their records.

6. How quickly can you send someone for a site visit?

Most Delhi NCR locations get a site visit scheduled within 24–48 hours of your first call or WhatsApp message; urgent repair requests are prioritised further.

7. Do you handle emergency or same-day repair welding?

Yes, for urgent issues like a broken gate, damaged railing, or security-related repair, we prioritise same-day or next-day response wherever our schedule allows.

8. What's the difference between mild steel (MS) and stainless steel (SS) fabrication?

MS is stronger for the price and typically painted or powder-coated afterward — used for gates, sheds, and structural frames. SS costs more but resists corrosion and doesn't need repainting, making it the better choice for visible railings and humid or high-exposure locations.

9. Can you match an existing gate or railing design?

Yes, we regularly replicate or extend existing designs to match a property's current gates, grills, or railings, and we can also build entirely new designs from a photo or reference you provide.

10. Do you provide the steel/material, or do I need to arrange it?

We source and supply all material as part of the project unless you specifically want to provide your own — we're happy to discuss either arrangement during the site visit.

11. How long does a typical gate or railing project take?

A standard gate or railing section is usually completed in a single day once material is confirmed; larger jobs like full staircases, multiple floors, or shed structures take longer and get a specific timeline in your estimate.

12. Do you handle structural welding for buildings under construction?

Yes, we do structural steel fabrication for columns, beams, trusses, and mezzanine structures, working alongside contractors and builders on active construction sites.

13. What is included in industrial welding services?

Industrial welding covers factory sheds, warehouse structures, machine bases, conveyor and pipe supports, platforms, and structural modifications inside active industrial facilities.

14. Do you fabricate and install tin sheds/PEB sheds?

Yes, we handle both the structural steel framing and the roofing/cladding sheet installation for tin sheds, warehouse roofs, and PEB-style structures.

15. Can you build pergolas for terraces and rooftops?

Yes, we fabricate steel-frame pergolas for terraces, rooftops, gardens, and poolside areas, with options for shade fabric, polycarbonate sheeting, or wood-finish cladding.

16. Do you fabricate LED hoarding and unipole structures?

Yes, we design and weld the steel base, mast, and mounting frame for outdoor LED hoardings and unipole advertising structures, accounting for wind load at height.

17. Is there a minimum project size you accept?

No — we take on everything from a single hinge repair to full industrial structures. Small repair jobs are as welcome as large fabrication projects.

18. How is welding and fabrication work priced?

Pricing depends on material type, design complexity, project size, site conditions, and finishing requirements — we provide a written estimate after a free site visit rather than quoting blind.

19. Do you offer any warranty or guarantee on welding work?

We stand behind the quality of our welds and workmanship, and we address any workmanship issues raised after project completion — specific terms are confirmed for each project during the estimate.

20. Do you paint or powder-coat fabricated items after welding?

Yes, finishing — including priming, painting, and powder coating — is available and is factored into your project estimate based on the finish you choose.

21. Can you fabricate laser-cut designer gates and railings?

Yes, we combine laser-cut steel and stainless-steel panels with precision welding for designer gates, decorative railings, and jaali/screen patterns.

22. Do you work on weekends or only weekdays?

We accommodate weekend site visits and, where scheduling allows, weekend project work — let us know your availability when you contact us.

23. Do you handle boundary fencing for plots and factories?

Yes, we fabricate MS angle/pipe fencing, chain-link fencing with welded frames, and higher-security palisade fencing for plots, farmhouses, and industrial sites.

24. Can you repair welds or structures done by another contractor?

Yes, we regularly inspect and repair existing gates, railings, sheds, and structures, whether we built them originally or not.

25. How do I get a quote for my project?

Call us, message us on WhatsApp, or fill out the contact form on this site — we'll schedule a free site visit and follow up with a written estimate.

Ready to Start Your Welding or Fabrication Project?

Whether it's a broken gate that needs fixing today, a new railing for your balcony, or a full industrial shed for your factory, Vishwakarma Fabrication Work Pvt. Ltd. is ready to visit your site, understand what you need, and give you a clear, honest estimate — with GST billing, experienced welders, and on-time delivery every time.